Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

 

SYNTEC ENVIRONMENTAL PRODUCTS

TENFLOW

SynTec Tenflow tri-planar gecomposite has at least 2-3 times the transmissivity of conventional bi-axial geocomposites for both fluid or gas transmission. This high performance geocomposite allows for the wide levels of gas venting to occur preventing gas pressure build-up under the liner.

TENSEAL

SynTec Tenseal GM is capable of providing filtration - drainage - protection - water proofing, and will have properties conforming to the values and test methods listed below. The cuspated/ textured HPDE membrane meets GRI-GM13 values for 40 mil thick textured membrane.

 

TENDRAIN

SynTec Tendrain is a tri-planar geocomposite that consists of three structural ribs. The top and bottom ribs keep the filter geotextile layer out of the central flow channel, while the center structural ribs provide load bearing and create flow channels.

UBXC

SynTec UBXC is a drainage geocomposite of a unitary flow channel structure with thermally bonded non-woven geotextiles on both sides. The product is capable of providing high transmissivity in a soil environment under sustained normal loads.

ROADRAIN T

SynTec Roadrain-T is the engineered solution to problems associated with drainage in roadways, parking lots, paved walkways, airports, railway facilities, embankments and dike drainage.


GEOGRIDS

SynTec provides high quality polypropylene biaxial SBX-Series geogrids for base reinforcement and subgrade improvement. In addition, SynTec offers high-density polyethylene (HDPE) uniaxial UX-Series geogrids for segmental block walls, reinforced soil slopes, embankments, temporary walls, panel walls, and welded wire walls.

SCOURSHIELD

SynTec ScourShield is a flexible, heavy duty "Anchored Reinforced Vegetation System" used to prevent scour erosion in areas of concentrated flows.

MULTIMAT

The 3-dimensional "gripping" geomats are designed for the protection and planting of slopes subjected to surface erosion whenever a suitable vegetative substrate soil exits.

GRASS PROTECTION (GP) MESH

GP mesh is a heavy duty extruded polymer grid for protecting and reinforcing grassy areas to be used by vehicles with an imposed loading of up to 8 tones per axle. Once established, it will protect the grass roots from damage and help prevent rutting.

TURF REINFORCEMENT (TR) MESH

TR mesh protects against ground rutting due to car traffic and light weight trucks and ensures a good grasp for grass roots. TR is perfect for applications where exposure to traffic is less frequent and the grass has time to recover between passes.

GEOTEXTILES

SynTec nonwoven geotextile fabrics are produced by needlepunching synthetic staple fibers in a random network to form a high strength dimensionally stable fabric. The fibers are especially formulated to resist ultraviolet light deterioration, and are inert to commonly encountered
soil chemicals.
 

Product Literature

 

 

 

SYNTEC

 

Syntec News